Difference between revisions of "SMHS LongitudinalData"

From SOCR
Jump to: navigation, search
(→‎Scientific Methods for Health Sciences - Longitudinal Data)
(→‎Scientific Methods for Health Sciences - Longitudinal Data)
 
(One intermediate revision by the same user not shown)
Line 21: Line 21:
 
</center>
 
</center>
  
−
3) Theory
+
===Theory===
  
−
3.1) Longitudinal data: data collected from a large population over a given time period where the same subjects are measured at multiple points in time.  
+
'''1) Longitudinal data'''
−
The primary advantage of longitudinal dataset is that they can measure change. Hence, we can estimate. For example, for the dataset listed above, we can estimate the effect of various factors on improvement in students’ achievement. Or, we can estimate the overall effectiveness of individual teachers by examining the performance of successive classes of students they teach.  
+
Longitudinal data is  data collected from a large population over a given time period where the same subjects are measured at multiple points in time.  
−
The longitudinal data extend into both the past and the present, which enable us to evaluate the effect of a specific policy by looking at student performance before or after the policy was introduced.  
+
*The primary advantage of longitudinal dataset is that they can measure change. Hence, we can estimate. For example, for the dataset listed above, we can estimate the effect of various factors on improvement in students’ achievement. Or, we can estimate the overall effectiveness of individual teachers by examining the performance of successive classes of students they teach.  
−
Longitudinal data also allows us to use sophisticated analytic strategies to measure the impact of various policies with reasonable precision.
+
*The longitudinal data extend into both the past and the present, which enable us to evaluate the effect of a specific policy by looking at student performance before or after the policy was introduced.  
 +
*Longitudinal data also allows us to use sophisticated analytic strategies to measure the impact of various policies with reasonable precision.
  
−
3.2) Longitudinal study: an investigation where participant outcomes and possibly treatments or exposures are collected at multiple follow-up times. It generally yields multiple (repeated) measurements on each subject, which are correlated within subjects and thus require special statistical techniques for analysis and inference. In longitudinal study, we may also be interested in measuring the time until a key clinical event such as time to death, where survival analysis is generally applied for analysis.
+
'''2) Longitudinal study'''
−
It plays an important role in various studies like epidemiology, clinical research and biological studies. Longitudinal studies are used to characterize normal growth and aging to assess the effect of risk factors on human health to evaluate the effectiveness of treatments and involve lots of efforts.
+
A longitudinal study is an investigation where participant outcomes and possibly treatments or exposures are collected at multiple follow-up times. It generally yields multiple (repeated) measurements on each subject, which are correlated within subjects and thus require special statistical techniques for analysis and inference. In longitudinal study, we may also be interested in measuring the time until a key clinical event such as time to death, where survival analysis is generally applied for analysis.
−
Benefits of longitudinal studies: (1) incident events are recorded, a prospective longitudinal study measures the new occurrence of disease; (2) prospective ascertainment of exposure, data recorded at multiple follow-up visits may recall bias; (3) measurement of individual change in outcomes; (4) separation of time effects: cohort, period, age; (5) control for cohort effects, in a longitudinal study, the cohort under study is fixed and thus changes in time are not confounded by cohort differences.  
+
*It plays an important role in various studies like epidemiology, clinical research and biological studies. Longitudinal studies are used to characterize normal growth and aging to assess the effect of risk factors on human health to evaluate the effectiveness of treatments and involve lots of efforts.
−
Challenges of longitudinal studies: (1) participant follow-up, there is risk of bias due to incomplete follow-up of study participants; (2) analysis of correlated data, if intra-subject correlation of response measurements is ignored, then inferences such as statistical tests or confidence interval can be grossly invalid; (3) time-varying covariate, the direction of causality can be complicated by ‘feedback’ between the outcome and the exposure.  
+
*Benefits of longitudinal studies: (1) incident events are recorded, a prospective longitudinal study measures the new occurrence of disease; (2) prospective ascertainment of exposure, data recorded at multiple follow-up visits may recall bias; (3) measurement of individual change in outcomes; (4) separation of time effects: cohort, period, age; (5) control for cohort effects, in a longitudinal study, the cohort under study is fixed and thus changes in time are not confounded by cohort differences.  
 +
*Challenges of longitudinal studies: (1) participant follow-up, there is risk of bias due to incomplete follow-up of study participants; (2) analysis of correlated data, if intra-subject correlation of response measurements is ignored, then inferences such as statistical tests or confidence interval can be grossly invalid; (3) time-varying covariate, the direction of causality can be complicated by ‘feedback’ between the outcome and the exposure.  
  
−
3.3) Notations: use Y_{ij} to denote the outcome measured on subject i at time t_{ij}, where i =1, \cdots, N is index for subject, and j = 1, \cdots, n is index for observations within a subject. The measurement time follows a common set of follow-up times t_{ij} = t_{j}. Use X_{ij} to denote covariates associated with observations Y_{ij}. Common covariates in a longitudinal study include the time, t_{ij}, and person-level characteristics such as age, treatment assignments, and etc. In many cases, the scientific studies focus on mean responses as a function of covariates such as treatment and time, we can also make statistical inference on within-person correlation of observation. Define \rho_{jk} = corr(Y_{ij}, Y_{ik}), the within-subject correlation between observations at time t_{j} and t_{k}.  
+
'''3) Notations'''
 +
Notations use $Y_{ij}$ to denote the outcome measured on subject $i$ at time $t_{ij},$ where $i=1, \cdots$, $N$ is index for subject, and $j = 1$, $\cdots$, $n$ is index for observations within a subject. The measurement time follows a common set of follow-up times $t_{ij} = t_{j}$. Use $X_{ij}$ to denote covariates associated with observations $Y_{ij}$. Common covariates in a longitudinal study include the time, $t_{ij}$, and person-level characteristics such as age, treatment assignments, and etc. In many cases, the scientific studies focus on mean responses as a function of covariates such as treatment and time, we can also make statistical inference on within-person correlation of observation. Define $\rho_{jk} = corr(Y_{ij}, Y_{ik}),$ the within-subject correlation between observations at time $t_{j} and t_{k}.$
  
−
3.4) Exploratory data analysis: to discover patterns of systematic variation across groups, as well as aspects of random variation among individual patients.
+
'''4) Exploratory data analysis'''
−
Group means: if we are looking to measure the average response over time, statistical measures like means and standard deviation, which can reveal whether different groups change in a similar or different fashion.  
+
This is used to discover patterns of systematic variation across groups, as well as aspects of random variation among individual patients.
−
Variation among individuals: single variance parameter can be used to summarize uncertainty or variability in a response measurement. In  longitudinal data, ‘distance’ between measurements on different subjects is usually expected to be greater than the distance between repeated measurements taken on the same subject, hence though the total variance can be noted as \sigma^{2} =1/2 E[(Y_{ij}-Y_{i’j})^{2}] assuming E(Y_{ij}) = E(Y_{i’j}) = \mu, the expected variation for two measurements taken on the same person but at time t_{j} and t_{k} may not equal the total variation of \sigma^{2} since the measurements are correlated: \sigma^{2}(1-\rho_{jk})=1/2 E[(Y_{ij}-Y_{ik})^{2}] assuming E(Y_{ij}) = E(Y_{ik}) = \mu. When \rho_{jk} > 0, between-subject variation is greater than within-subject variation.
+
*Group means: if we are looking to measure the average response over time, statistical measures like means and standard deviation, which can reveal whether different groups change in a similar or different fashion.  
−
Characterizing correlation and covariance: characterizing the correlation is useful for understanding components of variation and for identifying a variance or correlation model for regression methods such as GEE (generalized estimating equations) or mixed-effects models. Covariance can be written in terms of \sigma_{j}^2 and the correlation \rho_{jk}: cov(Y_{i})=\begin{bmatrix} \sigma_{1}^2 & \sigma_{1}\sigma_{2}\rho_{12} &\cdots &\sigma_{1}\sigma_{n}\rho_{1n} \\ \sigma_{2}\sigma_{1}\rho_{21}&\sigma_{2}^2 &\cdots &\sigma_{2}\sigma_{n}\rho_{2n} \\ \vdots &\vdots  & \ddots &\vdots \\ \sigma_{n}\sigma_{1}\rho_{n1}&\sigma_{n}\sigma_{2}\rho_{n2} &\cdots &\sigma_{n}^2 \end{bmatrix}; the correlation matrix: cov(Y_{i})=\begin{bmatrix} 1 & \rho_{12} &\cdots &\rho_{1n} \\\rho_{21}&1 & \cdots&\rho_{2n} \\ \vdots &\vdots  & \ddots &\vdots \\\rho_{n1}&\rho_{n2} &\cdots &1 \end{bmatrix}.
+
*Variation among individuals: single variance parameter can be used to summarize uncertainty or variability in a response measurement. In  longitudinal data, ‘distance’ between measurements on different subjects is usually expected to be greater than the distance between repeated measurements taken on the same subject, hence though the total variance can be noted as $\sigma^{2} =1/2 E[(Y_{ij}-Y_{i’j})^{2}]$ assuming $E(Y_{ij}) = E(Y_{i’j}) = \mu,$ the expected variation for two measurements taken on the same person but at time $t_{j}$ and $t_{k}$ may not equal the total variation of $\sigma^{2}$ since the measurements are correlated:$ \sigma^{2}(1-\rho_{jk})=1/2 E[(Y_{ij}-Y_{ik})^{2}]$ assuming $E(Y_{ij}) = E(Y_{ik}) = \mu.$ When $\rho_{jk} > 0,$ between-subject variation is greater than within-subject variation.
 +
*Characterizing correlation and covariance: characterizing the correlation is useful for understanding components of variation and for identifying a variance or correlation model for regression methods such as GEE (generalized estimating equations) or mixed-effects models. Covariance can be written in terms of $\sigma_{j}^2$ and the correlation $\rho_{jk}: cov(Y_{i})=\begin{bmatrix} \sigma_{1}^2 & \sigma_{1}\sigma_{2}\rho_{12} &\cdots &\sigma_{1}\sigma_{n}\rho_{1n} \\ \sigma_{2}\sigma_{1}\rho_{21}&\sigma_{2}^2 &\cdots &\sigma_{2}\sigma_{n}\rho_{2n} \\ \vdots &\vdots  & \ddots &\vdots \\ \sigma_{n}\sigma_{1}\rho_{n1}&\sigma_{n}\sigma_{2}\rho_{n2} &\cdots &\sigma_{n}^2 \end{bmatrix}; the correlation matrix: cov(Y_{i})=\begin{bmatrix} 1 & \rho_{12} &\cdots &\rho_{1n} \\\rho_{21}&1 & \cdots&\rho_{2n} \\ \vdots &\vdots  & \ddots &\vdots \\\rho_{n1}&\rho_{n2} &\cdots &1 \end{bmatrix}.$
  
−
4) Applications
+
===Applications===
  
−
4.1) This article (http://biomet.oxfordjournals.org/content/73/1/13.short) proposed an extension of generalized linear models to the analysis of longitudinal data. This paper introduced a class of estimating equations that give consistent estimates of the regression parameters and of their variance under mild assumptions about the time dependence. The estimating equations were derived without specifying the joint distribution of a subject's observations yet they reduce to the score equations for multivariate Gaussian outcomes. Asymptotic theory was presented for the general class of estimators. Specific cases in which are assumed independence, m-dependence and exchangeable correlation structures from each subject were discussed. Efficiency of the proposed estimators in two simple situations was considered.  
+
1) [http://biomet.oxfordjournals.org/content/73/1/13.short This article] proposed an extension of generalized linear models to the analysis of longitudinal data. This paper introduced a class of estimating equations that give consistent estimates of the regression parameters and of their variance under mild assumptions about the time dependence. The estimating equations were derived without specifying the joint distribution of a subject's observations yet they reduce to the score equations for multivariate Gaussian outcomes. Asymptotic theory was presented for the general class of estimators. Specific cases in which are assumed independence, m-dependence and exchangeable correlation structures from each subject were discussed. Efficiency of the proposed estimators in two simple situations was considered.  
  
−
4.2) This article (http://onlinelibrary.wiley.com/doi/10.1002/sim.4780111406/abstract;jsessionid=0538E29F4FDDD9D0DD3D672621073EA7.f03t03?deniedAccessCustomisedMessage=&userIsAuthenticated=false) reviewed statistical methods for the analysis of discrete and continuous longitudinal data. The relative merits of longitudinal and cross-sectional studies were discussed. Three approaches, marginal, transition and random effects models, were presented with emphasis on the distinct interpretations of their coefficients in the discrete data case. This paper reviewed generalized estimating equations for inferences about marginal models. The ideas were illustrated with analyses of a 2 × 2 crossover trial with binary responses and a randomized longitudinal study with a count outcome.
+
2) [http://onlinelibrary.wiley.com/doi/10.1002/sim.4780111406/abstract;jsessionid=0538E29F4FDDD9D0DD3D672621073EA7.f03t03?deniedAccessCustomisedMessage=&userIsAuthenticated=false This article] reviewed statistical methods for the analysis of discrete and continuous longitudinal data. The relative merits of longitudinal and cross-sectional studies were discussed. Three approaches, marginal, transition and random effects models, were presented with emphasis on the distinct interpretations of their coefficients in the discrete data case. This paper reviewed generalized estimating equations for inferences about marginal models. The ideas were illustrated with analyses of a 2 × 2 crossover trial with binary responses and a randomized longitudinal study with a count outcome.
  
  
−
5) Software  
+
===Software===
−
In R:  package of ‘longitudinal’
+
In R:  package of ‘longitudinal’
  
−
6) Problems
+
===Problems===
−
install.packages('longitudinal')
+
install.packages('longitudinal')
−
library(longitudinal)
+
library(longitudinal)
−
data(tcell)
+
data(tcell)
−
is.longitudinal(tcell.34)
+
is.longitudinal(tcell.34)
−
TRUE
+
TRUE
−
summary(tcell.34)
+
summary(tcell.34)
−
Longitudinal data:
+
Longitudinal data:
 
  58 variables measured at 10 different time points
 
  58 variables measured at 10 different time points
 
  Total number of measurements per variable: 340  
 
  Total number of measurements per variable: 340  
Line 63: Line 67:
  
 
  To obtain the measurement design call 'get.time.repeats()'.
 
  To obtain the measurement design call 'get.time.repeats()'.
−
plot(tcell.10,1:9)  ## plot the first 9 time series of the data
+
plot(tcell.10,1:9)  ## plot the first 9 time series of the data
 +
 
 +
 
  
 +
[[Image:SMHS__Longtitud_Fig1_.png|500px]]
  
  
 +
dim(tcell.34)  ## dataset with 34 repeats
 +
[1] 340  58
 +
  get.time.repeats(tcell.34)
 +
$\$ $time
 +
[1]  0  2  4  6  8 18 24 32 48 72
 +
 +
$\$ $repeats
 +
[1] 34 34 34 34 34 34 34 34 34 34
 +
 +
is.equally.spaced(tcell.34)
 +
[1] FALSE
 +
is.regularly.sampled(tcell.34)
 +
[1] TRUE
 +
has.repeated.measurements(tcell.34)
 +
[1] TRUE
 +
condense.longitudinal(tcell.34,1:2,mean) # compute mean value at each time point for the first two gene
 +
          RB1    CCNG1
 +
[1,] 17.41394 16.48101
 +
[2,] 17.62637 16.34122
 +
[3,] 17.89343 16.26661
 +
[4,] 17.37539 15.91950
 +
[5,] 17.57670 16.25621
 +
[6,] 17.85805 16.26411
 +
[7,] 17.76270 16.24127
 +
[8,] 17.22543 16.52049
 +
[9,] 16.86306 16.14295
 +
[10,] 17.09348 16.58913
 +
has.repeated.measurements(tcell.34)
 +
TRUE
 +
 +
Sorry, I failed to find a SOCR dataset to fit here…
  
 +
===References===
 +
[http://en.wikipedia.org/wiki/Longitudinal_study  Longitudinal Study Wikipedia]
  
 +
[http://faculty.washington.edu/heagerty/Courses/VA-longitudinal/private/LDAchapter.pdf  Longitudinal Data Analysis]
  
  

Latest revision as of 11:37, 17 October 2014

Scientific Methods for Health Sciences - Longitudinal Data

Overview

Longitudinal data are referred to data collected from a large population over a given time period where the same subjects are measured at multiple points in time. It is widely used in statistical and financial studies. In this section, we are going to introduce to the concept of longitudinal data.

Motivation

Data measured at multiple points in time on the same subject are commonly used in various studies. For example, consider a dataset contain students’ standard test score in four successive years (attached in the table). How do we categorize data like this?


Student Name Grade 1 (2010) Raw Score Grade 2 (2011) Raw Score Grade 3 (2012) Raw Score Grade 4 (2013) Raw Score
Tom 339 350 361 366
Mike 332 343 350 351
Vivian 360 380 400 420

Theory

1) Longitudinal data Longitudinal data is data collected from a large population over a given time period where the same subjects are measured at multiple points in time.

  • The primary advantage of longitudinal dataset is that they can measure change. Hence, we can estimate. For example, for the dataset listed above, we can estimate the effect of various factors on improvement in students’ achievement. Or, we can estimate the overall effectiveness of individual teachers by examining the performance of successive classes of students they teach.
  • The longitudinal data extend into both the past and the present, which enable us to evaluate the effect of a specific policy by looking at student performance before or after the policy was introduced.
  • Longitudinal data also allows us to use sophisticated analytic strategies to measure the impact of various policies with reasonable precision.

2) Longitudinal study A longitudinal study is an investigation where participant outcomes and possibly treatments or exposures are collected at multiple follow-up times. It generally yields multiple (repeated) measurements on each subject, which are correlated within subjects and thus require special statistical techniques for analysis and inference. In longitudinal study, we may also be interested in measuring the time until a key clinical event such as time to death, where survival analysis is generally applied for analysis.

  • It plays an important role in various studies like epidemiology, clinical research and biological studies. Longitudinal studies are used to characterize normal growth and aging to assess the effect of risk factors on human health to evaluate the effectiveness of treatments and involve lots of efforts.
  • Benefits of longitudinal studies: (1) incident events are recorded, a prospective longitudinal study measures the new occurrence of disease; (2) prospective ascertainment of exposure, data recorded at multiple follow-up visits may recall bias; (3) measurement of individual change in outcomes; (4) separation of time effects: cohort, period, age; (5) control for cohort effects, in a longitudinal study, the cohort under study is fixed and thus changes in time are not confounded by cohort differences.
  • Challenges of longitudinal studies: (1) participant follow-up, there is risk of bias due to incomplete follow-up of study participants; (2) analysis of correlated data, if intra-subject correlation of response measurements is ignored, then inferences such as statistical tests or confidence interval can be grossly invalid; (3) time-varying covariate, the direction of causality can be complicated by ‘feedback’ between the outcome and the exposure.

3) Notations Notations use $Y_{ij}$ to denote the outcome measured on subject $i$ at time $t_{ij},$ where $i=1, \cdots$, $N$ is index for subject, and $j = 1$, $\cdots$, $n$ is index for observations within a subject. The measurement time follows a common set of follow-up times $t_{ij} = t_{j}$. Use $X_{ij}$ to denote covariates associated with observations $Y_{ij}$. Common covariates in a longitudinal study include the time, $t_{ij}$, and person-level characteristics such as age, treatment assignments, and etc. In many cases, the scientific studies focus on mean responses as a function of covariates such as treatment and time, we can also make statistical inference on within-person correlation of observation. Define $\rho_{jk} = corr(Y_{ij}, Y_{ik}),$ the within-subject correlation between observations at time $t_{j} and t_{k}.$

4) Exploratory data analysis This is used to discover patterns of systematic variation across groups, as well as aspects of random variation among individual patients.

  • Group means: if we are looking to measure the average response over time, statistical measures like means and standard deviation, which can reveal whether different groups change in a similar or different fashion.
  • Variation among individuals: single variance parameter can be used to summarize uncertainty or variability in a response measurement. In longitudinal data, ‘distance’ between measurements on different subjects is usually expected to be greater than the distance between repeated measurements taken on the same subject, hence though the total variance can be noted as $\sigma^{2} =1/2 E[(Y_{ij}-Y_{i’j})^{2}]$ assuming $E(Y_{ij}) = E(Y_{i’j}) = \mu,$ the expected variation for two measurements taken on the same person but at time $t_{j}$ and $t_{k}$ may not equal the total variation of $\sigma^{2}$ since the measurements are correlated:$ \sigma^{2}(1-\rho_{jk})=1/2 E[(Y_{ij}-Y_{ik})^{2}]$ assuming $E(Y_{ij}) = E(Y_{ik}) = \mu.$ When $\rho_{jk} > 0,$ between-subject variation is greater than within-subject variation.
  • Characterizing correlation and covariance: characterizing the correlation is useful for understanding components of variation and for identifying a variance or correlation model for regression methods such as GEE (generalized estimating equations) or mixed-effects models. Covariance can be written in terms of $\sigma_{j}^2$ and the correlation $\rho_{jk}: cov(Y_{i})=\begin{bmatrix} \sigma_{1}^2 & \sigma_{1}\sigma_{2}\rho_{12} &\cdots &\sigma_{1}\sigma_{n}\rho_{1n} \\ \sigma_{2}\sigma_{1}\rho_{21}&\sigma_{2}^2 &\cdots &\sigma_{2}\sigma_{n}\rho_{2n} \\ \vdots &\vdots & \ddots &\vdots \\ \sigma_{n}\sigma_{1}\rho_{n1}&\sigma_{n}\sigma_{2}\rho_{n2} &\cdots &\sigma_{n}^2 \end{bmatrix}; the correlation matrix: cov(Y_{i})=\begin{bmatrix} 1 & \rho_{12} &\cdots &\rho_{1n} \\\rho_{21}&1 & \cdots&\rho_{2n} \\ \vdots &\vdots & \ddots &\vdots \\\rho_{n1}&\rho_{n2} &\cdots &1 \end{bmatrix}.$

Applications

1) This article proposed an extension of generalized linear models to the analysis of longitudinal data. This paper introduced a class of estimating equations that give consistent estimates of the regression parameters and of their variance under mild assumptions about the time dependence. The estimating equations were derived without specifying the joint distribution of a subject's observations yet they reduce to the score equations for multivariate Gaussian outcomes. Asymptotic theory was presented for the general class of estimators. Specific cases in which are assumed independence, m-dependence and exchangeable correlation structures from each subject were discussed. Efficiency of the proposed estimators in two simple situations was considered.

2) This article reviewed statistical methods for the analysis of discrete and continuous longitudinal data. The relative merits of longitudinal and cross-sectional studies were discussed. Three approaches, marginal, transition and random effects models, were presented with emphasis on the distinct interpretations of their coefficients in the discrete data case. This paper reviewed generalized estimating equations for inferences about marginal models. The ideas were illustrated with analyses of a 2 × 2 crossover trial with binary responses and a randomized longitudinal study with a count outcome.


Software

In R:  package of ‘longitudinal’

Problems

install.packages('longitudinal')
library(longitudinal)
data(tcell)
is.longitudinal(tcell.34)
TRUE
summary(tcell.34)
Longitudinal data:
58 variables measured at 10 different time points
Total number of measurements per variable: 340 
Repeated measurements: yes 

To obtain the measurement design call 'get.time.repeats()'.
plot(tcell.10,1:9)   ## plot the first 9 time series of the data


SMHS Longtitud Fig1 .png 


dim(tcell.34)  ## dataset with 34 repeats
[1] 340  58
 get.time.repeats(tcell.34)
$\$ $time
[1]  0  2  4  6  8 18 24 32 48 72

$\$ $repeats 

[1] 34 34 34 34 34 34 34 34 34 34

is.equally.spaced(tcell.34)
[1] FALSE
is.regularly.sampled(tcell.34)
[1] TRUE
has.repeated.measurements(tcell.34)
[1] TRUE
condense.longitudinal(tcell.34,1:2,mean) # compute mean value at each time point for the first two gene
          RB1    CCNG1
[1,] 17.41394 16.48101
[2,] 17.62637 16.34122
[3,] 17.89343 16.26661
[4,] 17.37539 15.91950
[5,] 17.57670 16.25621
[6,] 17.85805 16.26411
[7,] 17.76270 16.24127
[8,] 17.22543 16.52049
[9,] 16.86306 16.14295

[10,] 17.09348 16.58913 has.repeated.measurements(tcell.34) TRUE

Sorry, I failed to find a SOCR dataset to fit here…

References

Longitudinal Study Wikipedia

Longitudinal Data Analysis














Translate this page:

(default)
Uk flag.gif

Deutsch
De flag.gif

Español
Es flag.gif

Français
Fr flag.gif

Italiano
It flag.gif

Português
Pt flag.gif

日本語
Jp flag.gif

България
Bg flag.gif

الامارات العربية المتحدة
Ae flag.gif

Suomi
Fi flag.gif

इस भाषा में
In flag.gif

Norge
No flag.png

한국어
Kr flag.gif

中文
Cn flag.gif

繁体中文
Cn flag.gif

Русский
Ru flag.gif

Nederlands
Nl flag.gif

Ελληνικά
Gr flag.gif

Hrvatska
Hr flag.gif

Česká republika
Cz flag.gif

Danmark
Dk flag.gif

Polska
Pl flag.png

România
Ro flag.png

Sverige
Se flag.gif

Retrieved from "https://wiki.socr.umich.edu/index.php?title=SMHS_LongitudinalData&oldid=14439"