SMHS GEE

Scientific Methods for Health Sciences - Generalized Estimating Equations (GEE) Models

Overview

Generalized estimating equation (GEE) is a commonly used method to estimate the parameters of a generalized linear model with a possible unknown correlation between outcomes. It provides a general approach for analyzing discrete and continuous responses with marginal models and works as a popular alternative to maximum likelihood estimation (MLE). In this section, we are going to present a general introduction to the GEE method and illustrate its application with examples. The R package geeglm will be discussed in the attached paper reference.

Motivation

There is no nature specification or convenient ways to deal with situations like the joint multivariate distribution of $Y_{i} = {(Y_{i1}, Y_{i2}, \cdots, Y_{in})}'$ where the responses are discrete. That’s where the GEE method is proposed based on the concept of estimating equations. It provides a general approach for analyzing discrete and continuous responses with marginal models. So, how does the GEE model work?

Theory

1) GEE

GEE is a commonly used method to estimate the parameters of a generalized linear model with a possible unknown correlation between outcomes. Parameter estimates from the GEE are consistent even when the covariance is mis-specified under mild regularity conditions and the focus of GEE is on estimating the average response over the population rather than the regression parameters that would enable prediction of the effect of changing one or more covariates on a given individual.

• GEEs belong to the class of semi-parametric regression techniques since they rely on specification of only the first two moments and are a popular alternative to the likelihood-based generalized linear mixed model.
• They are commonly used in large epidemiological studies, especially multi-site cohort studies because they can handle many types of unmeasured dependence between outcomes.

2) Marginal models

The vector of observations from subject $I$ are $Y_{i} = {(Y_{i1}, Y_{i2}, \cdots, Y_{in})}',$ for $(i=1,2, \cdots, N).$ Consider a marginal model that has a mean function, a function of predictors; a known variance functions (discrete data the mean determines the variance); possibly a scale parameter for overdispersion; a working correlation matrix.

• More specifically, the marginal mean of the response is $E[Y_{ij}]=\mu_{ij},$ the mean depends on explanatory variables $X_{ij}$ through a known link function: $g(\mu_{ij})=\eta_{ij} ={X_{ij}}’ \beta.$
• The marginal variance of $Y_{ij}$ depends on the marginal mean according to $Var[Y_{ij}]=v(\mu_{ij}) \phi,$ where the variance function $v(\mu_{ij})$ is known, $\phi =1$ is fixed for Poisson, Bernoulli. Parameter $\phi$ may have to be estimated for normal model or overdispersed data. Correlation between $Y_{ij}$ and $Y_{ik}$ is a function of extra parameter, \alpha. Correlation may depend on means $\mu_{ij}$ and $\mu_{ik}.$
• The mean idea is to generalize the usual univariate likelihood equations by introducing the covariance matrix of the vector of responses,$ Y_{i}$. For linear models, weighted least squares (WLS) or generalized least squares (GLS) can be considered a special case of this ‘estimating equations’ approach; for non-linear models, this approach is called ‘generalized estimating equations’ (GEE).

3) GEE computation:

• Consider normal linear regression $y_{i}={x_{i}}’ \beta + \epsilon_{i}, \epsilon_{i} \sim N(0, \sigma^{2}).$ The normal density for $N$ observations looks like $(2* \pi * \sigma^{2})^{-N/2}$ times the exponential of $\sum_{i=1}^{N} -0.5(y_{i}- {x_{i}}' \beta) \sigma^{-2} (y_{i} - {x_{i}}' \beta),$ which is also referred to as the log likelihood function.
• Likelihood equations, normal regression: find the maximum likelihood estimates by finding the value $\hat{\beta}$ of $\beta$ that maximizes the likelihood $l(\beta)= \sum_{i=1}^{N} -0.5(y_{i}- {x_{i}}' \beta) \sigma^{-2} (y_{i} - {x_{i}}' \beta);$ maximum of a function $l(\beta)$ is found by differentiating the function $l(\beta)$ with respect to $\beta,$ setting this equal to zero and then solving $\frac{dl(\beta)}{d \beta} = 0.$
• Regression likelihood equations: the log likelihood looks like $\sum_{i=1}^{N} -0.5(y_{i}- {x_{i}}' \beta) \sigma^{-2} (y_{i} - {x_{i}}' \beta);$ differentiating with respect to $\beta$ and setting equal to zero gives $\sum_{i=1}^{N}{x_{i}}'\sigma^{-2}(y_{i}-{x_{i}}'\beta) = 0.$ This is the likelihood equation. Solving for $\beta$ gives us $\hat{\beta}=(\sum_{i} x_{i}{x_{i}}')^{-1}(\sum_{i} x_{i}y_{i}).$
• Normal longitudinal model: generalize to multivariate regression (longitudinal models); suppose continuous data $Y_{i}$, nx1; predictor matrix $X_{i}$,$n$ rows by $p$ columns; coefficient vector $\beta, p by 1$. The model is $Y_{i}=X_{i}+\epsilon_{i},$ the residual distribution is $\epsilon \sim N(0, V_{i}),$ variance matrix is $V_{i}$ to distinguish from summation $\sum.$ Covariance matrix $V_{i}$ depends on unknown parameter $\theta.$
• Multivariate likelihood: the multivariate normal log likelihood is $\sum_{i=1}^{N} -0.5{(Y_{i}-X_{i}\beta)}'V_{i}^{-1}(Y_{i}-X_{i}\beta);$ looks like a normal regression likelihood as before; vector $Y_{i}$ has replaced scalar $y_{i}$; vector $X_{i}\beta$ has replaced scalar ${x_{i}}’\beta;$ and matrix $V_{i}^{-1}$ has replaced $\sigma^{-2}.$
• Multivariate observation likelihood: differentiate the log likelihood and set to zero; gives the likelihood equation $\sum_{i=1}^{N}{X_{i}}'V_{i}^{-1}(Y_{i}-X_{i}\beta)=0;$ similar to linear regression likelihood equation; the solution (suppose we know $V_{i})$ is $\hat{\beta}=(\sum_{i=1}^{N}{X_{i}'V_{i}^{-1}X_{i}})^{-1}(\sum_{i=1}^{N}{X_{i}}'V_{i}^{-1}Y_{i}),$ this is the weighted least squares estimator for $\hat{\beta}.$
• Interpretation of the likelihood equations: $\sum_{i=1}^{N}{X_{i}}'V_{i}^{-1}(Y_{i}-X_{i}\beta)=0;$ the residual $(Y_{i}-X_{i}\beta)$ is $(Y_{i}-\mu_{i}),$ the observation vector $Y_{i}$ minus its mean $\mu_{i}=X_{i}\beta;$ the $V_{i}^{-1}$ is the inverse of the inverse of the covariance matrix; the $X_{i}$ can be thought of as the derivative of $\mu_{i}$ with respect to the regression parameter $\beta,$ written as $d\mu_{i}/d\beta.$
• Multivariate generalized linear models equations: generalize to generalized linear models (GLMs) with correlated data. It is no longer a likelihood equation, instead use a weighted least squares equation, where we replace each term in the previous likelihood equation with a generalized linear model equivalent, and include something to adjust for correlations. $Y_{i}$ vector remains the same; mean vector is $\mu_{i}$ rather than $X_{i}\alpha;$ replace $X_{i}$ with the derivative $D_{i} = d\mu_{i}/d\beta;$ for GLMs $D_{i}$ has components that look like $D_{1}^{-1}X_{i}, matrix D_{1}$ is diagonal and has elements $v(\mu_{ij})$ the variance functions of the means; thus $D_{i}$ is a weighted predictor matrix; the overdispersion parameter $\phi$ is not involved at this stage. The $V_{i}$’s are constructed to be similar to the covariance matrix $var[Y_{i}]$, but not actually equal; the GEEs are $\sum_{i=1}^{N}D_{i}V_{i}^{-1}(Y_{i}-\mu_{i}(\beta))=0,$ solve for $\beta$ giving the GEE estimate we write as $\hat{\beta}_{GEE}.$
• Constructing the working covariance matrix: $V_{i} \approx Var[Y_{i}];$ separate $V_{i}$ into two parts of variance matrix and correlation matrix; the variance matrix is a diagonal matrix $A_{i}$ of variances; the diagonal elements of $A_{i}$ are $\phi v(\mu_{ij})$ are the variances of the observation $Y_{ij}.$ The correlation matrix $Corr(Y_{i})$ is a function of unknown parameter $\alpha$; the matrix $V_{i}$ is known as a working covariance matrix; it is not the true underlying correlation matrix $Corr[Y_{i}]$;, the $V_{i}$ is close to $Var[Y_{i}],$ but is not assumed to be exactly correct.
• Variances of the GEE estimates: the working correlation is a postulated covariance matrix $Y_{i}-\mu_{i};$ not the final or true or modeled covariance matrix; rather a working correlation matrix used to create estimates $\hat{\beta}_{GEE}.$ If the model for the data is correct, then the covariance matrix of the estimate is $B^{-1}=Var[\hat{\beta}_{GEE}]=(\sum_{i=1}^{N}{D_{i}}'V_{i}^{-1}D_{i})^{-1};$ this is the same as the proc mixed covariance model $(\sum_{i=1}{N}X_{i}'V_{i}^{-1}X_{i})^{-1},$ but with $D_{i}=d\mu_{i}/d\beta replacing X_{i}.$ Assuming working correlation matrix is incorrect, modify covariance matrix $B^{-1}, Var[\hat{\beta}_{GEE}]=B^{-1}MB^{-1},$ increase the variance estimate; inflate $Var[\hat{\beta}_{GEE}]$ to pay for errors in $Corr[Y_{i}],$ the $B^{-1}$ is the bread; $M$ is the meat in the $B^{-1}MB^{-1}$ sandwich, which gives this estimator the nickname ‘sandwich estimator’.
• The middle: $M=\sum_{i=1}^{N}D_{i}'V_{i}^{-1}Cov[Y_{i}]V_{i}^{-1}D_{i},$ estimate $D_{i}=d\mu_{i}/d\beta$ and $V_{i}$ is the working correlation matrix times the variance function; Given that we don’t know $Cov[Y_{i}],$ we replace it with $(Y_{i}-\hat{\mu}_{i})(Y_{i}-\hat{\mu}_{i})’,$ which has the right expectation and $B^{-1}MB^{-1}$ is referred to as aka Huber sandwich estimator or robust standard errors.
• Advantages of GEE: the estimated regression coefficient $\hat{\beta}_{GEE}$ is asymptotically correct if the underlying regression mean model is correct even if assumed correlation model is incorrect. Valid standard errors are attained with the sandwich covariance estimator and are easy to use methodology.
• Disadvantages of GEE: the assumptions can correspond to a mathematically impossible model, that is some combinations of correlations and variances are mathematically impossible, no matter how the data is generated; the sandwich estimator inflates standard errors; inflated SE’s are a serious cost of not modeling the covariance correctly; GEE does not fully specify a statistical model and covers instead with asymptotic statements; full assumptions are hidden.
• GEE does not allow or make individual subject predictions; GEE methodology most suited to be balanced longitudinal design where the number of observations $N$ is large and number $n$ of repeated measure is small; GEE is not good for highly unbalanced data sets.

Applications

1) This article discussed extensions of generalized linear models for the analysis of longitudinal data. Two approaches are considered: subject-specific (SS) models in which heterogeneity in regression parameters is explicitly modeled; and population-average (PA) models in which the aggregate response for the population is the focus. We use a generalized estimating equation approach to fit both classes of models for discrete and continuous outcomes. When the subject-specific parameters are assumed to follow a Gaussian distribution, simple relationships between the PA and SS parameters are available. The methods are illustrated with an analysis of data on mother’s smoking and children’s respiratory disease.

2) This article discussed about the generalized estimating equations for correlated binary data using the odds ratio as a measure of association. Moment methods for analyzing repeated binary responses have been proposed before and estimation of the parameters were associated with the expected value of an individual's vector of binary responses as well as the correlations between pairs of binary responses. Because the odds ratio has many desirable properties, and some investigators may find the odds ratio is easier to interpret, the paper discuss modeling the association between binary responses at pairs of times with the odds ratio and modify the estimating equations of Prentice to estimate the odds ratios. In simulations, the parameter estimates for the logistic regression model for the marginal probabilities appear slightly more efficient when using the odds ratio parameterization.

3) This article talked about the generalized estimating equation (GEE) for longitudinal data analysis. The GEE approach of Zeger and Liang facilitates analysis of data collected in longitudinal, nested, or repeated measures designs. GEEs use the generalized linear model to estimate more efficient and unbiased regression parameters relative to ordinary least squares regression in part because they permit specification of a working correlation matrix that accounts for the form of within-subject correlation of responses on dependent variables of many different distributions, including normal, binomial, and Poisson. The author briefly explains the theory behind GEEs and their beneficial statistical properties and limitations and compares GEEs to suboptimal approaches for analyzing longitudinal data through use of two examples. The first demonstration applies GEEs to the analysis of data from a longitudinal lab study with a counted response variable; the second demonstration applies GEEs to analysis of data with a normally distributed response variable from subjects nested within branch offices of an organization.

Software

The geeglm functiongeeglem(outcome ~ baseline + center + sex + treat + age + I($age^$), data = respiratory, id = interaction (center, id), family = binomial, corstr = ‘exchangeable’)

Problems

Example 1: library(geepack) # install this package first data(dietox) summary(dietox)

    Weight            Feed             Time             Pig      
Min.   : 15.00   Min.   :  3.30   Min.   : 1.000   Min.   :4601  
1st Qu.: 38.30   1st Qu.: 32.80   1st Qu.: 3.000   1st Qu.:4857  
Median : 59.20   Median : 74.50   Median : 6.000   Median :5866  
Mean   : 60.73   Mean   : 80.73   Mean   : 6.481   Mean   :6238  
3rd Qu.: 81.20   3rd Qu.:123.00   3rd Qu.: 9.000   3rd Qu.:8050  
Max.   :117.00   Max.   :224.50   Max.   :12.000   Max.   :8442  
                 NA's   :72                                      
     Evit             Cu            Litter     
Min.   :1.000   Min.   :1.000   Min.   : 1.00  
1st Qu.:1.000   1st Qu.:1.000   1st Qu.: 5.00  
Median :2.000   Median :2.000   Median :11.00  
Mean   :2.027   Mean   :2.015   Mean   :12.14  
3rd Qu.:3.000   3rd Qu.:3.000   3rd Qu.:20.00  
Max.   :3.000   Max.   :3.000   Max.   :24.00  

attach(dietox) Cu <- as.factor(dietox$Cu) mf <- formula(Weight~Cu*(Time+I(Time^2)+I(Time^3))) gee <- geeglm(mf,data=dietox,id=Pig,family=poisson('identity'),corstr='ar1') ## The geeglm function fits generalized estimating equations using the ‘geese.fit’ function of the ‘geepack’ package for doing the actual computations. gee Call: geeglm(formula = mf, family = poisson("identity"), data = dietox,

   id = Pig, corstr = "ar1")

Coefficients:

(Intercept)           Cu         Time    I(Time^2)    I(Time^3)      Cu:Time 

22.025614857 0.013857443 2.177350061 0.683063921 -0.027808001 0.424728590 Cu:I(Time^2) Cu:I(Time^3) -0.047363387 0.001313779

Degrees of Freedom: 861 Total (i.e. Null); 853 Residual

Scale Link: identity Estimated Scale Parameters: [1] 0.7877976

Correlation: Structure = ar1 Link = identity Estimated Correlation Parameters:

   alpha 

0.9576663 Number of clusters: 72 Maximum cluster size: 12

aov(gee)

Call:

  aov(formula = gee)

Terms:

                     Cu     Time I(Time^2) I(Time^3)  Cu:Time Cu:I(Time^2)

Sum of Squares 521.2 492381.6 1006.6 297.1 0.0 34.1 Deg. of Freedom 1 1 1 1 1 1

               Cu:I(Time^3) Residuals

Sum of Squares 1.4 42350.3 Deg. of Freedom 1 853

Residual standard error: 7.046179 Estimated effects may be unbalanced

Example 2 (use dataset of Normal and Schizophrenia Neuroimaging study of Children at http://wiki.socr.umich.edu/index.php/SOCR_Data_Oct2009_ID_NI) ▪ Subject: Subject identifier ▪ Age: Subject Age ▪ DX: Subject diagnosis (Normals=1; Schizophrenia=2) ▪ Sex: Subject gender (Male=1; female=2) ▪ FS_IQ: Subject Intelligence Quotient (IQ) ▪ TBV: Total Brain Volume (mm
3

) ▪ GMV: Total Gray Matter Volume (mm
3

) ▪ WMV: Total White Matter Volume (mm
3

) ▪ CSF: Total Cerebrospinal Fluid (mm
3

) ▪ Background: Background volume (mm
3

) ▪ L_superior_frontal_gyrus, R_superior_frontal_gyrus, ..., brainstem: 56 regional cortical and subcortical volumes (region anatomical names are encoded in the column heading).

neuro <- read.csv('M:/neuro.csv',header=T) summary(neuro) mf2 <- formula(FS_IQ ~ Sex+Age*Sex+Age^2+Age^3+TBV+GMV+WMV+CSF+Background) gee2 <- geeglm(mf2,data=neuro,id=Subject,family=poisson('identity'),corstr='ar1') gee2 Call: geeglm(formula = mf2, family = poisson("identity"), data = neuro,

   id = Subject, corstr = "ar1")

Coefficients:

 (Intercept)           Sex           Age           TBV           GMV           WMV           CSF    Background 

-3.093394e+02 2.255625e+01 3.532712e+00 3.392570e+00 -3.392482e+00 -3.392484e+00 -3.392693e+00 3.144914e-05

     Sex:Age 

-1.526318e+00

Degrees of Freedom: 63 Total (i.e. Null); 54 Residual

Scale Link: identity Estimated Scale Parameters: [1] 2.538312

Correlation: Structure = ar1 Link = identity Estimated Correlation Parameters: alpha

   0 

Number of clusters: 63 Maximum cluster size: 1

aov(gee2)

Call:

  aov(formula = gee2)

Terms:

                     Sex       Age       TBV       GMV       WMV       CSF Background   Sex:Age Residuals

Sum of Squares 497.829 740.825 1040.712 25.337 3131.065 205.501 384.453 366.533 15459.175 Deg. of Freedom 1 1 1 1 1 1 1 1 54

Residual standard error: 16.91984 Estimated effects may be unbalanced

mf3 <- formula(FS_IQ ~ Sex+Age*Sex+Age^2+Age^3) gee3 <- geeglm(mf3,data=neuro,id=Subject,family=poisson('identity'),corstr='ar1') gee3

Call: geeglm(formula = mf3, family = poisson("identity"), data = neuro,

   id = Subject, corstr = "ar1")

Coefficients: (Intercept) Sex Age Sex:Age

81.3791778   1.9781743   1.7571481  -0.5086719 

Degrees of Freedom: 63 Total (i.e. Null); 59 Residual

Scale Link: identity Estimated Scale Parameters: [1] 3.364596

Correlation: Structure = ar1 Link = identity Estimated Correlation Parameters: alpha

   0 

Number of clusters: 63 Maximum cluster size: 1

aov(gee3) Call:

  aov(formula = gee3)

Terms:

                     Sex       Age   Sex:Age Residuals

Sum of Squares 497.829 740.825 29.199 20583.576 Deg. of Freedom 1 1 1 59

Residual standard error: 18.67817 Estimated effects may be unbalanced

References

GEE Wikipedia

Introductions to GEE

---

• SOCR Home page: http://www.socr.umich.edu

---

---

Translate this page:

(default)	Deutsch	Español	Français	Italiano	Português	日本語	България	الامارات العربية المتحدة	Suomi	इस भाषा में	Norge
한국어	中文	繁体中文	Русский	Nederlands	Ελληνικά	Hrvatska	Česká republika	Danmark	Polska	România	Sverige